 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES APEKA4030TGC GREEN Features 4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE :500PCS / REEL. RoHS COMPLIANT. Description The Green source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1188 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP:1204000453 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APEKA4030TGC GREEN (InGaN) WATER CLEAR 50 Typ. 100 Viewing Angle 21/2 90 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 500 505 30 56 3.6 4.4 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 110 30 150 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1188 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP:1204000453 Green APEKA4030TGC SPEC NO: DSAD1188 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP:1204000453 APEKA4030TGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1188 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP:1204000453 PACKING & LABEL SPECIFICATIONS APEKA4030TGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1188 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP:1204000453 |
Price & Availability of APEKA4030TGC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |